Staff

Twitter Facebook Google+ Stumbleupon LinkedIn

Iswandi Imran

Guru Besar
Nama : Prof.Ir. Iswandi Imran MA.Sc.,Ph.D.
Kelompok Keahlian : Rekayasa Struktur
Sekolah / Fakultas : Fakultas Teknik Sipil dan Lingkungan
Jabatan Fungsional : Guru Besar
S1 ITB Bandung Indonesia 1987
S2 University of Toronto Ontario Kanada 1990
S3 University of Toronto Ontario Kanada 1994
  • Research Collaboration Agreement for The AIC Infrastructure Cluster Strategic Research Program (2018)
  • Riset Unggulan ITB : PPMB (2018)
  • Perilaku Struktur Kolom Beton Geopolimer Akibat Beban Aksial Konsentris dan Lateral Siklik (2017)
  • Studi Eksperimental Pemanfaatan Limbah Industri Pembangkit Listri (PLTU) Sebagai Bahan Dasar Beton Geopolimer untuk Aplikasi Struktur Kolom Bangunan (2017)
  • Aplikasi Penggunaan Baja Tulangan Mutu Tinggi pada Elemen Struktur Tahan Gempa (Pembebanan Siklis) (2016)
  • Pasta Geopolymer Sebagai Fire Resistance untuk Struktur Baja (2016)
  • Pengembangan LALWA (Local Artificial Lightweight Aggregate) Sebagai Material Internal Curing untuk Mengurangi Potensial Susut pada Beton Mutu Tinggi (2016)
  • Perilaku Histeretik Join Balok Kolom Reactive Powder Concrete Prategang Parsial (2016)
  • Studi Penggunaan Baja Tulangan Mutu Tinggi di Elemen Struktur Menggunakan Beton Berserat dengan Pembebanan Siklik (2016)
  • Structural Analysis and Dumping System The Building Design (2015)
  • Pengembangan Campuran dan Sifat Reologi Material Komposit Semen Kinerja Tinggi Berbasis Serat Sintesis (2014)
  • Program Riset Unggulan Pusat Penelitian Mitigasi Bencana (2014)
  • Studi Ketahanan Beton Nano Material Terhadap Infiltrasi Sulfat (2014)
  • Pengembangan Alkali Activated Material Berbahan Limbah Industri/Metalurgi Untuk Mendapatkan Green Material Infrastruktur (2013)
  • Penggunaan Nano-Silika dalam Peningkatan Kuat Tekan dan Durabilitas Beton (2013)
  • Perilaku Mekanik Beton Nanomaterial Akibat Beban Triaksial (2013)
  • Riset Unggulan ITB 2013 - Pusat Penelitian Mitigasi Bencana (2013)
  • Dana Bantuan CPI-ITB untuk Pembuatan DED Tahap Awal Gedung Riset dan Museum Mineral dan Energi ITB (2012)
  • Pemanfaatan Serat Alami Untuk Perkuatan Dinding Bata (2012)
  • Pengembangan Alkali Activated Material Berbahan Limbah Industri/Metalurgi Untuk Mendapatkan Green Material Infrastruktur (2012)
  • PENGEMBANGAN PROPORSI CAMPURAN BETON KINERJA TINGGI BERBASIS KUAT TEKAN DAN DURABILITAS BETON (2012)
  • Penggunaan Nano-Silika dalam Peningkatan Kuat Tekan dan Durabilitas Beton (2012)
  • Program Riset Unggulan 2012 Pusat Penelitian Mitigasi Bencana (PPMB-ITB) (2012)
  • Insentif Penulisan Buku Ajar Tahun 2011 (2011)
  • Pengembangan Alkali Activated Material Berbahan Abu Batubara PLTU Berbasis Kinerja Mutu Tinggi Untuk Mendapatkan Green Material Infrastruktur (2011)
  • System Development (SDV) 2011 SUB COMPONENT B.2c GRANTS FOR PERFORMANCE BASED CONTRACT (2011)
  • Prilaku Struktur Kolom Beton Bertulang Yang Diberi Tulangan Pengekang Dengan Pen-Binder Terhadap Beban Aksial-Eksentris (2010)
  • Pengembangan sistem Elemen Pengikat untuk Meningkatkan Efektivitas kekangan dan Mempermudah Pemasangan Tulangan Pengekangan Kolom Beton Bertulang (2009)
  • Seismic Performance of RC Frames Infilled with Lightweight Materials:An Experimental and Analytical Study (2008)
  • Antonius, Imran, I., Setiyawan, P. (2017) On the Confined High-strength Concrete and Need of Future Research, Procedia Engineering, Vol. 171, pp. 121-130. DOI: 10.1016/j.proeng.2017.01.318(Internasional)
  • Nurjannah, S.A., Budiono, B., Imran, I., Sugiri, S. (2016) Comparison of performance of partial prestressed beam-column subassemblages made of reactive powder concrete and normal concrete materials using finite element models, IOP Conference Series: Materials Science and Engineering, Vol. 128, Issue 1, Art. No. 12015. DOI: 10.1088/1757-899X/128/1/012015(Internasional)
  • Nurjannah, S.A., Budiono, B., Imran, I., Sugiri, S. (2016) The hysteretic behavior of partially pre-stressed beam-column joint sub-assemblages made of reactive powder concrete, Journal of Engineering and Technological Sciences, Vol. 48, Issue 5, pp. 550-570. DOI: 10.5614/j.eng.technol.sci.2016.48.5.4(Internasional)
  • Irsyam, M., Hutabarat, D., Asrurifak, M., Imran, I., Widiyantoro, S., Hendriyawan, Sadisun, I., Hutapea, B., Afriansyah, T., Pindratno, H., Firmanti, A., Ridwan, M., Haridjono, S.W., Pandhu, R. (2015) Development of seismic risk microzonation maps of Jakarta city, Geotechnics for Catastrophic Flooding Events-Proceedings of the 4th International Conference on Geotechnical Engineering for Disaster Mitigation and Rehabilation, GEDMAR 2014, pp. 35-47. (Internasional)
  • Priastiwi, Y.A., Imran, I., Nuroji (2015) The effect of different shapes of confinement in compression zone on beams ductility subjected to monotonic loading, Procedia Engineering, Vol. 125, pp. 918-924. DOI: 10.1016/j.proeng.2015.11.098(Internasional)
  • Rosidawani, Imran, I., Sugiri, S., Pane, I. (2015) Behaviour of macro synthetic fiber reinforced concrete columns under concentric axial compression, Procedia Engineering, Vol. 125, pp. 987-994. DOI: 10.1016/j.proeng.2015.11.152(Internasional)
  • Saloma, Nasution, A., Imran, I., Abdullah, M. (2015) Improvement of concrete durability by nanomaterials, Procedia Engineering, Vol. 125, pp. 608-612. DOI: 10.1016/j.proeng.2015.11.078(Internasional)
  • Setiawan, J., Imran, I. (2015) Study of minimum base shear on design seismic code, Green Building, Materials and Civil Engineering-Proceedings of the 4th International Conference on GreenBuilding, Materials and Civil Engineering, GBMCE 2014, pp. 507-511. (Internasional)
  • Simatupang, P.H., Imran, I., Pane, I., Sunendar, B. (2015) On the development of a nomogram for alkali activated fly ash material (AAFAM) mixtures, Journal of Engineering and Technological Sciences, Vol. 47, Issue 3, pp. 231-249. DOI: 10.5614/j.eng.technol.sci.2015.47.3.1(Internasional)
  • Gunadi, R., Budiono, B., Imran, I., Sofwan, A. (2014) The behavior of slab-column connections with modified shear reinforcement under cyclic load, Journal of Engineering and Technological Sciences, Vol. 46 B, Issue 1, pp. 17-36. DOI: 10.5614/j.eng.technol.sci.2014.46.1.2(Internasional)
  • Priastiwi, Y.A., Imran, I., Nuroji, Hidayat, A. (2014) Behavior of ductile beam with addition confinement in compression zone, Procedia Engineering, Vol. 95, pp. 132-138. DOI: 10.1016/j.proeng.2014.12.172(Internasional)
  • Antonius, Imran, I. (2012) Experimental study of confined low-, medium- and high-strength concrete subjected to concentric compression, ITB Journal of Engineering Science, Vol. 44 B, Issue 3, pp. 252-269. DOI: 10.5614/itbj.eng.sci.2012.44.3.4(Internasional)
  • Jonbi, Hariandja, B., Imran, I., Pane, I. (2012) Development of mix proportion for high-performance concrete using locally available ingredients based on compressive strength and durability, Applied Mechanics and Materials, Vol. 174-177, pp. 1067-1071. DOI: 10.4028/www.scientific.net/AMM.174-177.1067(Internasional)
  • Jonbi, Hariandja, B., Imran, I., Pane, I. (2012) Material development of nano silica Indonesia for concrete mix, Advanced Materials Research, Vol. 450-451, pp. 277-280. DOI: 10.4028/www.scientific.net/AMR.450-451.277(Internasional)
  • Jonbi, Pane, I., Hariandja, B., Imran, I. (2012) The use of nanosilica for improving of concrete compressive strength and durability, Applied Mechanics and Materials, Vol. 204-208, pp. 4059-4062. DOI: 10.4028/www.scientific.net/AMM.204-208.4059(Internasional)
  • Kristianto, A., Imran, I., Suarjana, M., Pane, I. (2012) Confinement of reinforced-concrete columns with non- code compliant confining reinforcement plus supplemental pen-binder, ITB Journal of Engineering Science, Vol. 44 B, Issue 3, pp. 220-237. DOI: 10.5614/itbj.eng.sci.2012.44.3.2(Internasional)
  • Meas, K., Li, B., Imran, I. (2012) Seismic performance of lightly reinforced concrete exterior beam-column joints, Advances in Structural Engineering, Vol. 15, Issue 10, pp. 1765-1780. DOI: 10.1260/1369-4332.15.10.1765(Internasional)
  • Simatupang, P.H., Hanafi, R., Sunendar, B., Imran, I., Pane, I. (2012) The study of red mud addition influences in metakaolinite-based geopolymer characteristics, Advanced Materials Research, Vol. 450-451, pp. 281-285. DOI: 10.4028/www.scientific.net/AMR.450-451.281(Internasional)
  • Kawada, N., Gan, B.S., Imran, I., Ninomiya, H. (2011) Bounding grid algorithm for calculating particle interactions in SPH simulations, Procedia Engineering, Vol. 14, pp. 2743-2750. DOI: 10.1016/j.proeng.2011.07.345(Internasional)
  • Imran, I., Aryanto, A. (2008) Experimental study on the behavior of R/C frames in-filled with lightweight materials subjected to in-plane lateral loads, EASEC-11-Eleventh East Asia-Pacific Conference on Structural Engineering and Construction. (Internasional)
  • Imran, I., Retika, A.C., Simatupang, R. (2008) Mechanical characteristics of steel rebars available in indonesia and its effects on structural responses of ductile R/C structural elements, EASEC-11-Eleventh East Asia-Pacific Conference on Structural Engineering and Construction. (Internasional)
  • Tjondro, J.A., Suryoatmono, B., Imran, I. (2006) Dowel bearing strength of Indonesian-wood species, Real Structures: Bridges and Tall Buildings-Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010, Vol. 4, pp. 153-158. (Internasional)
  • Djunaedi, H., Suhud, R., Imran, I., Holil, B. (2004) Influences of silica modulus (SM) and lime saturation factor (LSF) to the alternative properties of hydraulic cement, 5th International PhD Symposium in Civil Engineering-Proceedings of the 5th International PhD Symposium in Civil Engineering, Vol. 1, pp. 241-249. (Internasional)
  • Imran, I., Pantazopoulou, S.J. (2001) Plasticity model for concrete under triaxial compressions, Journal of Engineering Mechanics, Vol. 127, Issue 3, pp. 281-290. DOI: 10.1061/(ASCE)0733-9399(2001)127:3(281)(Internasional)
  • Imran, I., Munaf, D.R., Pantazopoulou, S.J. (1997) Cyclic behaviour of plain concrete subjected to multidirectional compression, Proceedings of the International Conference on Computational Methods and Experimental Measurements, CMEM, pp. 205-212. (Internasional)
  • Imran, I., Pantazopoulou, S.J. (1996) Experimental study of plain concrete under triaxial stress, ACI Materials Journal, Vol. 93, Issue 6, pp. 589-601. (Internasional)
  • Pantazopoulou, S., Imran, I. (1992) Slab-wall connections under lateral forces, ACI Structural Journal, Vol. 89, Issue 5, pp. 515-527. (Internasional)